Home / Operating Systems / Windows XP Internet Connection Sharing

Windows XP Internet Connection Sharing

Networking tips to share your broadband (or even dial-up) connection in Windows

Internet Connection Sharing (ICS) enables a Windows computer to share its Internet connection with computers on local area networks. It’s been around since Windows 98 SE, and with the launch of Windows XP, it’s only gotten better. Windows XP ICS has some notable advantages over the versions of ICS in Windows 98 Second Edition and Windows Me:

  • It’s easier to set up. There’s no software to install, and it doesn’t add any network components or protocols.

  • It’s much more reliable and much less likely to cause network problems.

  • You can create a Network Bridge connecting two or more local area networks and share the Internet connection with the computers on all of them. This is especially useful if your XP computer is connected to both a wired and wireless network.

  • ICS client computers can use XP’s Internet Gateway to monitor and control the server computer’s Internet connection. If you have a dial-up connection, you can connect and disconnect when deciding whether to enable ICS.

However, XP ICS is missing some features of those earlier versions. You can’t disable the DHCP server, change the server computer’s IP address, or change the range of addresses allocated by the DHCP server.

Consider these points when deciding whether to enable ICS.

WARNING #1: When you enable ICS, the network adapter connected to the local area network is assigned a static IP address of 192.168.0.1. The client computers are assigned other IP addresses in the 192.168.0.x range. These addresses may not be compatible with an existing network.

WARNING #2: Don’t enable ICS if any computer in your network is configured as a domain controller, DHCP server, or DNS server. Don’t enable it if another computer is running ICS or Network Address Translation (NAT).

WARNING #3: To enable ICS, you must be logged on as a user that is a member of the Administrators group.

WARNING #4: If you establish a Virtual Private Networking (VPN) connection while sharing a different connection, the client computers won’t be able to access the Internet until the VPN connection is ended.

Preparing for ICS

The ICS server computer must have two network connections: one for the Internet, and one for the local area network. The Internet connection may be a dial-up (PPP or ISDN), cable modem, DSL or other broadband Ethernet connection. The LAN connection may be a wired, wireless or even a USB Ethernetconnection. Before enabling ICS:

  • Set up your Internet connection and test it so that you know you can connect to the Internet.

  • Decide whether to allow client computers to control the server’s Internet connection using the Internet Gateway. This feature is automatically available on clients running Windows XP. On clients running Windows 98, Windows 98 Second Edition, or Windows Me, you must run XP’s Network Setup Wizard to enable the gateway. If you have a Windows XP CD-ROM, you can run the Wizard from it. Otherwise, create a network setup disk containing the Wizard files.

Enabling ICS on the Server Computer

You can enable ICS either manually or by using XP’s Network Setup Wizard. To use the Wizard, see the PracticallyNetworked page on Server Setup Using the Network Setup Wizard. You must use this method if you need to create a network setup disk. You can also enable ICS manually for a dial-up Internet connection or enable ICS manually for a broadband Internet connection.

Configuring ICS Client Computers

Now configure the other networked computers as ICS clients. Follow these links on PracticallyNetworked.com for computers running Windows 95 or Windows 2000 Professional. For Windows 98, Windows 98 Second Edition, Windows Me, or Windows XP, stay with these instructions for XP Client Wizard.

RECOMMENDED READING:
XP ICS – Starting the Network Setup Wizard
Windows XP has a built-in Network Setup Wizard that makes it easy to configure networking on computers running Windows 98, Windows 98 Second Edition, Windows Millennium Edition, and Windows XP. The Wizard does not work on computers running Windows 95, Windows NT, or Windows 2000.


This article originally appeared on PracticallyNetworked.com.

This article was originally published on April 04, 2008

Was this Article helpful? Yes No
Thank you for your feedback. 0% 0%