A type of printer that utilizes a laser beam to produce an image on a drum. The light of the laser alters the electrical charge on the drum wherever it hits. The drum is then rolled through a reservoir of toner, which is picked up by the charged portions of the drum. Finally, the toner is transferred to the paper through a combination of heat and pressure. This is also the way copy machines work.
Because an entire page is transmitted to a drum before the toner is applied, laser printers are sometimes called page printers. There are two other types of page printers that fall under the category of laser printers even though they do not use lasers at all. One uses an array of LEDs to expose the drum, and the other uses LCDs. Once the drum is charged, however, they both operate like a real laser printer.
One of the chief characteristics of laser printers is their resolution -- how many dots per inch (dpi) they lay down. The available resolutions range from 300 dpi at the low end to 1,200 dpi at the high end. By comparison, offset printing usually prints at 1,200 or 2,400 dpi. Some laser printers achieve higher resolutions with special techniques known generally as resolution enhancement.
In addition to the standard monochrome laser printer, which uses a single toner, there also exist color laser printers that use four toners to print in full color. Color laser printers tend to be about five to ten times as expensive as their monochrome siblings.
Laser printers produce very high-quality print and are capable of printing an almost unlimited variety of fonts. Most laser printers come with a basic set of fonts, called internal or resident fonts, but you can add additional fonts in one of two ways:
In addition to text, laser printers are very adept at printing graphics. However, you need significant amounts of memory in the printer to print high-resolution graphics. To print a full-page graphic at 300 dpi, for example, you need at least 1 MB (megabyte) of printer RAM. For a 600-dpi graphic, you need at least 4 MB RAM.
Because laser printers are nonimpact printers, they are much quieter than dot-matrix or daisy-wheel printers. They are also relatively fast, although not as fast as some dot-matrix printers. The speed of laser printers ranges from about 4 to 20 pages of text per minute (ppm). A typical rate of 6 ppm is equivalent to about 40 characters per second (cps).
Most software can print using either of these PDLs. PostScript tends to be a bit more expensive, but it has some features that PCL lacks and it is the standard for desktop publishing. Some printers support both PCL and PostScript.
- Watch Datamation's editor James Maguire moderate roundtable discussions with tech experts from companies such as Accenture, Dell, Blue Jeans Network, Microsoft and more »
Because nothing says "I Love You" Like an open source app. Read More »Guarding your Data against Cyber Attacks
In this new era of heightened stakes comes an increased need for a comprehensive security strategy. Let's take a look at how cyber-threats have... Read More »The Great Data Storage Debate: Is Tape Dead?
Tape clearly is on the decline. But remember, legacy systems can hang for a shockingly long time. Read More »
A network is a group of two or more computer systems or devices, linked together to share resources, exchange files and electronic communications.... Read More »Computer Architecture Study Guide
This Webopedia study guide describes the different parts of a computer system and their relations. Read More »Webopedia Polls
The trend for the past two years has been for shoppers to spend more online during the holiday season. How do you typically shop for holiday... Read More »