# Understanding IP Addressing

Last Updated: 04-25-2013 , Posted: 06-24-2010

## Every computer that communicates over the Internet is assigned an IP address that uniquely identifies the device and distinguishes it from other computers on the Internet.

Every computer that communicates over the Internet is assigned an IP address that uniquely identifies the device and distinguishes it from other computers on the Internet.

## What is an IP Address?

An IP address is an identifier for a computer or device on a TCP/IP network. Networks using the TCP/IP protocol route messages based on the IP address of the destination.

An IP address consists of 32 bits, often shown as 4 octets of numbers from 0-255 represented in decimal form instead of binary form. For example, the IP address: 168.212.226.204 in binary form is 10101000.11010100.11100010.11001100.

But it is easier for us to remember decimals than it is to remember binary numbers, so we use decimals to represent the IP addresses when describing them. However, the binary number is important because that will determine which class of network the IP address belongs to.

## The Two Parts of an IP Address

An IP address consists of two parts, one identifying the network and one identifying the node, or host.

The Class of the address determines which part belongs to the network address and which part belongs to the node address. All nodes on a given network share the same network prefix but must have a unique host number.

### Class A Network

In a Class A Network binary address start with 0, therefore the decimal number can be anywhere from 1 to 126. The first 8 bits (the first octet) identify the network and the remaining 24 bits indicate the host within the network. An example of a Class A IP address is 102.168.212.226, where "102" identifies the network and "168.212.226" identifies the host on that network.

### Class B Network

In a Class B Network, binary addresses start with 10, therefore the decimal number can be anywhere from 128 to 191. The number 127 is reserved for loopback and is used for internal testing on the local machine. The first 16 bits (the first two octets) identify the network and the remaining 16 bits indicate the host within the network. An example of a Class B IP address is 168.212.226.204 where "168.212" identifies the network and "226.204" identifies the host on that network.

### Class C Network

Binary addresses start with 110, therefore the decimal number can be anywhere from 192 to 223. The first 24 bits (the first three octets) identify the network and the remaining 8 bits indicate the host within the network. An example of a Class C IP address is 200.168.212.226 where "200.168.212" identifies the network and "226" identifies the host on that network.

### Class D Network

In a Class D Network, binary addresses start with 1110, therefore the decimal number can be anywhere from 224 to 239. Class D networks are used to support multicasting.

### Class E Network

In a Class E Network, binary addresses start with 1111, therefore the decimal number can be anywhere from 240 to 255. Class E networks are used for experimentation. They have never been documented or utilized in a standard way.

• ## We Recommend Sponsored

• ### Technology Hashtags: Webopedia's Twitter Guide to Technology Topics

This Webopedia.com guide to Twitter hashtags for technology topics provides descriptions of the most popular tech-related hashtags used in Twitter..

• ### Android Apps to Secure Your Device Data

Do you need to secure your Android device? From password managers to finding a lost or stolen device, here are three Android security apps worth c..

• ### The Top Private Cloud Project Mistakes You Need to Avoid

When it comes to your private cloud project it's easy to make mistakes that in hindsight look obvious, but can be hard to predict if you lack expe..